Table of Contents
Advertisement
XR630
Boom Emergency Lowering
In the event of total loss of engine power or hydraulic pump
failure with an elevated load, the situation must be properly
evaluated and dealt with on an individual basis.
Contact a local Xtreme Authorized Distributor for specific
instructions.
Secure the Telehandler and area by following the procedure
below until the situation has been properly evaluated.
1.
Clear the area around the Telehandler of all personnel.
2.
Engage the parking brake switch to the ON position and
Place the sift lever in NEUTRAL.
3.
Block all four wheels.
4.
Section off a large area under the boom with tape to
restrict any personnel from entering this potentially
dangerous area.
Operation Manual
68
Advertisement
Table of Contents
