MacDon M155 Installation Instructions Manual page 27

Self-propelled windrower, oil cooler bypass kit

Hide thumbs Also See for M155:

Table of Contents

CAUTION

Jack stand must be capable of supporting a minimum

of 5000 lb (2268 kg).

6. Place a jack under the leg jack point (A) and raise the

drive wheel slightly off the jack stand.

7. Remove the jack stand from under the cylinder lift

mount (B) and lower the drive wheel to the ground.

8. Remove the jack.

9. After one hour of operation, retorque the wheel nuts.

Then check every hour until two consecutive checks

produce no movement of the nuts.

147595

INSTALLATION INSTRUCTIONS

Figure 3.29: Drive Wheel Leg Jacking Point

Revision B

Table of Contents

Md 183518