Rear turn indicators
To change the rear turn indicator bulbs, rotate the
indicator body (1) through one quarter of a turn so
that the lens is up and extract indicator body from the
indicator light unit.
The bulb is of the banjo-type: press and rotate
anticlockwise to remove. Fit the spare bulb by
pressing and turning clockwise until it clicks. Refit the
indicator body (2) to its support and rotate it by a
quarter of a turn.
Number plate light
To access the number plate light bulb, unscrew the
screw (3) securing the cover (4). Remove the bulb
and replace it.
(fig. 80)
(fig. 81)
1
2
fig. 80
4
3
fig. 81
113