Front Fork Adjusters - Ducati SPECIAL EDITION SUPERBIKE 848 EVO CORSE Owner's Manual

Front fork adjusters

The front fork used on this motorcycle has rebound,
compression and spring preload adjustment.
This adjustment is done using the outer adjusters:
1) for rebound adjustment (fig. 51);
2) for spring preload adjustment (fig. 51);
3) for compression adjustment (fig. 52).
Put the motorcycle on the side stand and make sure
it is stable.
Turn the adjuster (1) on every fork leg top with a
suitable wrench to adjust rebound damping.
As you turn the adjusting screws (1 and 3), you will
hear them click. Each click identifies a setting. The
stiffest damping setting is obtained with the adjuster
turned fully clockwise to the "0" position. Start with
this position and turn anticlockwise. Count the clicks,
which correspond to position 1, 2 and so forth.
82
A
1
2
fig. 51