Lap Timer - Ducati SPECIAL EDITION SUPERBIKE 848 EVO CORSE Owner's Manual

LAP timer

This function lets you display lap times.
To enable this function, enter the menu and set the
"LAP" function to "On" by holding switch (12, fig. 6)
pressed in position B "▼" for 3 seconds.
The lap timer is started and stopped using the high-
beam flasher button FLASH (13, fig. 6) on the LH
switch.
When the LAP function is active, each time you press
the FLASH button, the display will show the lap time
for 10 seconds, before reverting to normal mode.
Up to 30 lap times can be stored.
If the memory is full, each time you press the FLASH
button, no more lap times can be saved and the
display will show the flashing message "FULL" for 3
seconds until the memory is reset.
fig. 21
37