Mounting The Device On A Din Rail - Siemens SIMATIC NET RUGGEDCOM RS401 Installation Manual

Forced airflow is not required. However, any increase in airflow will result in a reduc-
tion of ambient temperature and improve the long-term reliability of all equipment
mounted in the rack space.
Note
For detailed dimensions of the device with either DIN rail or panel hardware installed,
refer to
2.3.1

Mounting the Device on a DIN Rail

For DIN rail installations, the RUGGEDCOM RS401 can be equipped with panel/DIN
rail adapters preinstalled on each side of the chassis. The adapters allow the device to
be slid onto a standard 35 mm (1.4 in) IEC/EN 60715 or TS35 DIN rail.
Note
The device is available with a front panel or side panel mount option.
RUGGEDCOM RS401
Installation Manual, 01/2020, C79000-G8976-1017-09
"Dimension Drawings (Page
2.3.1 Mounting the Device on a DIN Rail
31)".
Installing the Device
9