Mounting The Device To A Panel - Siemens SIMATIC NET RUGGEDCOM RS401 Installation Manual

Installing the Device
2.3.2 Mounting the Device to a Panel
2.3.2

Mounting the Device to a Panel

For panel installations, the RUGGEDCOM RS401 can be equipped with panel/DIN rail
adapters pre-installed on each side of the chassis. The adapters allow the device to
be attached to a panel using screws.
Note
The device is available with a front panel or side panel mount option.
12
RUGGEDCOM RS401
Installation Manual, 01/2020, C79000-G8976-1017-09