Christie CP2315-RGB Installation And Setup Manual page 21

Power Cord Description
South Africa 250V/10A
1. Remove the projector touch panel.
2. Remove the rear cover of the projector by unscrewing the four captive screws.
3. Between the exhaust fans and the AC box assembly, disconnect the MAIN input plug from the
IN-LINE receptacle.
4. Remove the protective cap from the UPS input plug.
5. Connect the UPS input plug to the IN-LINE receptacle connector.
A MAIN input plug
B IN-LINE receptacle
C UPS input plug
6. Place the protective cap from the UPS plug on the MAIN input plug.
7. Reinstall the rear panel of the projector.
8. Reinstall the projector touch panel.
CP2315-RGB Installation and Setup Guide
020-102772-02 Rev. 1 (05-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Part Number
108-487100-XX
Installing and setting up
21