Protection Against Pressurized Systems - Bosch Rexroth IndraControl VCP 02.2 Project Planning Manual

3-10 Bosch Rexroth AG | Electric Drives and Controls
Safety Instructions for Electric Drives and Controls
3.12

Protection Against Pressurized Systems

Certain motors and drive controllers, corresponding to the information
in the respective Project Planning Manual, must be provided with pres-
surized media, such as compressed air, hydraulic oil, cooling fluid and
cooling lubricant supplied by external systems. Incorrect handling of
the supply and connections of pressurized systems can lead to injuries
or accidents. In these cases, improper handling of external supply sys-
tems, supply lines or connections can cause injuries or material dam-
age.
CAUTION
Danger of injury by incorrect handling of pressurized systems!
• Do not attempt to disassemble, to open or to cut a pressurized sys-
tem (danger of explosion).
• Observe the operation instructions of the respective manufacturer.
• Before disassembling pressurized systems, release pressure and
drain off the fluid or gas.
• Use suitable protective clothing (for example safety glasses, safety
shoes and safety gloves)
• Remove any fluid that has leaked out onto the floor immediately.
Environmental protection and disposal! The media used in the operation
of the pressurized system equipment may not be environmentally com-
patible. Media that are damaging the environment must be disposed
separately from normal waste. Observe the legal requirements in the
country of installation.
Rexroth IndraControl VCP 02 | R911310375 / 02