Replacing A Water Sensor - Huawei Telecom Power TP48200A-HT19C3 User Manual

Table of Contents

TP48200A-HT19C3 and TP48200A-HT19C4 Telecom

Power

User Manual

4.4.14 Replacing a Water Sensor

Prerequisites



Procedure

Step 1 Connect the ground cable to the ESD wrist strap, and put on the ESD wrist strap and ESD

gloves.

Step 2 Remove the water sensor cable from the UIM, as shown in Figure 4-28.

Figure 4-28 Removing the water sensor cable

Step 3 Cut off the cable tie of the water sensor and remove the water sensor.

Issue 03 (2019-11-15)

You have obtained an ESD wrist strap, a pair of ESD gloves, an ESD box or bag, the

cabinet door key, and tools.

The new water sensor is intact.

4 Maintenance

Table of Contents

Do you have a question about the Telecom Power TP48200A-HT19C3 and is the answer not in the manual?

Telecom power tp48200a-ht19c4Tp48200a-ht19c3Tp48200a-ht19c4