Troubleshooting Table; Problems With Operation - Hanseatic WQP8-J7736E User Manual

Page EN-30

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may re-
■
pair the dishwasher. If in doubt, con-
tact our service team for this (see
page EN-34).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers –
■
or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent us-
ers.

Problems with operation

Problem
The dishwasher cannot
be switched on.
The selected wash pro-
gramme will not start or
it stops.
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
■
Possible cause
The mains plug has not been
inserted into a socket.
There is no voltage being
supplied through the socket.
The dishwasher's door is not
closed properly.
The water tap is not properly
on.
The inlet hose is defective.
There is a risk of overflowing.
The electrical water stop sys-
tem has been activated.
NOTICE
If water overfl ows, close the water
supply immediately and do this be-
fore contacting the service team (see
page EN-34).
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a wash programme.
Solution
Connect the mains plug to the sock-
et.
Check the fuse. Check the socket
by connecting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our service team (see page
EN-34).