Troubleshooting Table; Problems With Operation - Hanseatic HGTI6082C147735TS User Manual

Page EN-36

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING
Risk of electric shock!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■ Only authorised specialists may re-
pair the dishwasher. If in doubt, con-
tact our Service department (see
page EN-40).
■ Only carry out the actions which are
described in this user manual.
■ Never repair defective dishwashers –
or dishwashers which you presume to
be defective – yourself. You can en-
danger yourself and subsequent us-
ers.

Problems with operation

Problem
Signal tones must
sound
The display switches
off.
The appliance
door will open
automatically.
The dishwasher
cannot be switched
on.
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■ If water overflows, switch off the
■ If the water has overflowed, remove
Possible cause
This is not an appliance fault. See "Signal tones" on page EN-23.
This is not an appliance fault. See "Display" on page EN-23.
This is not an appliance fault. The door opens automatically
during the drying phase to allow the hot steam to escape.
The mains plug has not been
inserted into a socket.
There is no voltage being
supplied through the socket.
NOTICE
water supply immediately and then
contact the Service department (see
page EN-40).
any water standing in the dishwasher
before restarting a wash programme.
Solution
Connect the mains plug to a
properly installed socket.
Check the fuse. Check the
socket by connecting another
device.