Installation, Connection And Initial Commissioning; Choose A Suitable Location; Having The Outlet Hose Connected - Hanseatic WQP8-J7736E User Manual

Installation, connection and initial commissioning

Choose a suitable location

CAUTION!
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may
result in injury.
Seek the help of another person dur-
■
ing transport, installation and assem-
bly.
If a trolley is used to move the appli-
■
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin or the floor
drain.
Installation, connection and initial commissioning
Having the outlet hose
connected
Malfunction!
Failing to connect the appliance cor-
rectly may cause malfunctions during
operation.
■
■
■
■
You can connect the end of the outlet hose in
two different ways:
– Connection to a floor drain.
– Direct connection to the odour seal (si-
NOTICE
Make sure that the waste water can
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40 mm.
Ensure that there are no kinks or dam-
age to the outlet hose.
Make sure that the end of the hose is
not submerged in the pumped water.
Do not extend the outlet hose or re-
place with another drainage pipe.
Ø ≥ 40 mm
phon) of your washing/dishwashing basin.
Technical measures are required for this.
For this reason, only plumbing experts or
members of our service team may connect
the outlet hose (see page EN-34). The out-
let hose must be a maximum of 1000 mm
above the floor.
Page EN-23