The Dishwashing Results Are Not Satisfactory - Hanseatic WQP8-J7736E User Manual

Page EN-32 Troubleshooting table

The dishwashing results are not satisfactory

Problem
There are residues or
streaks on the dishes.
The dishes are not com-
pletely clean.
Possible cause
The rinse aid is incorrectly
dosed.
There is no dishwasher salt.
The dishwasher salt is
clumpy.
There are food scraps which
are encrusted onto the dish-
es.
The dishes have not been
stacked optimally.
You have selected the incor-
rect wash programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low. Turn the water tap on completely.
The wash arm can not rotate
unhindered.
The nozzles on the wash arm
are blocked/calcified.
Solution
Adjust the dispensed dose see
„Adding rinse aid" on page EN-11).
Add dishwasher salt see „Adding
dishwasher salt" on page EN-12).
Stir the dishwasher salt using the
end of a spoon or similar.
Soak dirty dishes prior to washing
the dishes.
Stack the dishes in such a way that
all parts can be reached by the wa-
ter jets see „Loading the dishwash-
er" on page EN-13).
Select the correct dishwashing
programme see „Dishwasher pro-
gramme table" on page EN-16).
Use the correct dosage of dish-
washer detergent see „Dishwasher
programme table" on page EN-16).
Ensure that no dishes are impeding
the motion of the wash arm.
Clean the nozzles see „Cleaning
the wash arm" on page EN-22).