Table of Contents
Advertisement
Available languages
Available languages
Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■ Only authorised specialists may re-
pair the dishwasher. If in doubt, con-
tact our Service department (see
page EN-40).
■ Only carry out the actions which are
described in this user manual.
■ Never repair defective dishwashers –
or dishwashers which you presume to
be defective – yourself. You can en-
danger yourself and subsequent us-
ers.
Problem
1
The dishwasher
cannot be switched on.
2
The selected
programme will not
start or it stops.
Risk of damage to property!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■ If water overflows, switch off the
■ If the water has overflowed, remove
Possible cause
The mains plug has not
been inserted into a
socket.
There is no voltage being
supplied through the
socket.
The
button was not
pressed.
The dishwasher's door is
not closed properly.
The water tap is not
properly on.
The inlet hose is
defective.
There is a risk of
overflowing. The electrical
water stop system has
been activated.
Troubleshooting table
NOTICE
water supply immediately and then
contact the Service department (see
page EN-40).
any water standing in the dishwash-
er before relaunching a dishwashing
programme.
Solution
Insert the mains plug into the socket.
Check the fuse. Check the socket by
connecting another device.
Press the
button.
Close the dishwasher door.
Turn the water tap on completely.
Contact our service Centre (see "Service" on
page EN-40).
Page EN-37
Advertisement
Chapters
Table of Contents
