Adding Dishes; Button Lock / Child Lock - Hanseatic WQP8-J7736E User Manual

Page EN-20 Dishwasher operation
1. Press the button (11) in order to inter-
rupt the dishwashing programme.
The remaining duration display (6) will re-
main permanently illuminated.
2. If required, add extra dishwasher deter-
gent.
3. Press the button P (13), until the pro-
gramme symbols (1) go out and the
remaining duration display (6) is set to
"zero".
4. Select the new programme with the
P (13) button.
5. Select additional options if required, as
described on the previous pages.
6. Launch the programme.

Adding dishes

CAUTION!
Risk of scalding!
When you open the dishwasher door,
hot steam will come out.
Maintain a suffi cient distance from
■
the door and do not hold your head
or upper body directly above the
open door.
Keep children and pets away from the
■
appliance when opening the door.
Make sure that children do not open
■
the door during operation.
You can add more dishes even if the wash
programme is already running.
In this case, the current wash programme
should only have been running for a short
time, as only then can the additional dishes
be cleaned.
1. Press the button
the dishwasher programme.
The LED next to the programme symbol
will be continuously illuminated.
2. Open the door slightly and wait until both
wash arms have come to a stop.
3. Slowly open the door all the way.
4. Add the dishes.
5. Close the door.
6. Once again, press the button
After approx. 10 seconds, the appliance
will continue the programme cycle.
A signal tone will sound at regular
intervals while the wash programme is
paused.

Button lock / child lock

(4)
The dishwasher buttons can be locked, e.g.
for childproofing purposes.
• To switch the button lock
– on, press the plus and minus buttons
simultaneously
them in for as long as required until the
lock symbol (4) appears in the display.
The buttons are locked
– off, press both buttons again and hold
them in until the lock symbol disappears
from the display. The buttons are un-
locked.
(11)
(11) in order to pause
(11).
(12)
/ (12) and hold