Starting The Dishwashing Programme - Hanseatic WQP8-J7736E User Manual

Page EN-18 Dishwasher operation
This option produces a better drying result.
This option is not available with the pro-
grammes , and .
• In order to switch the option
– on, press the button
The icon (8) will appear on the display.
– off, press the button again. The icon will
disappear in the display.
Selecting the spraying arm(s)
(15) (9)
If only one of the two dish racks is loaded,
you should deactivate the wash arm that is
not required.
– Upper dish rack loaded:
– Lower dish rack loaded:
• Press the button (15) as often as
required, until only the symbol of the de-
sired spraying arm lights up.
Delayed start
(16).
(6)
The wash cycle normally starts as
soon as you press the button "Start/
Pause" (11).
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the plus or minus button
(12) as often as required until the dis-
play (10) shows the desired start delay
H:00 H:01
( ,
Starting the dishwashing
programme
(6)
1. Start the programme with the button
(11).
If you
– have not set up a start delay, the pro-
gramme cycle will begin after a few sec-
onds.
– have set up a start delay, the start delay
duration will initially remain in the display
(6); the dots between
of hours will flash. After the start delay
runs out, the programme will start.
During the programme cycle the display
will show the remaining time,(6) the dots
H:24
to ).
H
and the number
(12)
(11)