Troubleshooting Table; Problems With Operation - Hanseatic HG5544D63602EW User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, please check the tables to see if you can correct the
malfunction.
WARNING
Risk of electric shock!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■ Only authorised specialists may re-
pair the dishwasher. If in doubt, con-
tact our Service department (see
page EN-34).
■ Only carry out the actions which are
described in this user manual.
■ Never repair defective dishwashers
yourself. You can endanger yourself
and subsequent users.

Problems with operation

Problem
The dishwasher cannot be
switched on.
The selected dishwashing
programme will not start or it
stops.
Troubleshooting table
NOTICE
Risk of damage to property!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■ If water overfl ows, switch off the
water supply immediately and then
contact the Service department (see
page EN-34).
■ If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
Possible cause
The mains plug has not been
inserted into a socket.
There is no voltage being
supplied through the socket.
The dishwasher's door is not
closed properly.
The water tap is not on
properly.
The inlet hose is defective.
There is a risk of
overflowing. The electrical
water stop system has been
activated.
Page EN-31
Solution
Insert the mains plug into the
socket.
Check the fuse. Check
the socket by connecting
another device.
Close the dishwasher door.
Turn the water tap on
completely.
Contact our service team
(see page EN-34).