Horizontal Presentation - JUMO LOGOSCREEN nt Operating Instructions Manual

4 Visualization
Memory
presentation
Numerical
measurement
display
Channel
step-on
Group
step-on
4.3.2

Horizontal presentation

32
This function starts the presentation of the data that are available in the history
memory.
v Chapter 5 "Memory Presentation (History)"
This function is used to switch the numerical measurement display (diagram
header) and binary traces on or off, as well as to activate the envelope display.
This function activates the scaling display. Repeated activation steps through
the scaling for the channels within the group, and then blanks it out again.
Unlike "Group selection", where any group can be selected, this function is
used to select the groups one after another.
In the display, signals are continuously displayed on the screen running from
right to left.
The same functions as for the vertical presentation apply.
Programmable
alarm limits
Group number