Typographical Conventions - JUMO LOGOSCREEN nt Operating Instructions Manual

1 Introduction
1.3

Typographical Conventions

Warning signs
V
A
E
Note signs
H
v
h
10
The signs for Danger and Caution are used in this manual under the following
conditions:
Danger
This symbol is used when there may be danger to personnel if the
instructions are ignored or not followed correctly!
Warning
This symbol is used when there may be damage to equipment or data if the
instructions are ignored or not followed correctly!
Warning
This symbol is used where special care is required when handling
components liable to damage through electrostatic discharge.
Note
This symbol is used when your special attention is drawn to a remark.
Reference
This symbol refers to further information in other manuals, chapters or
sections.
Action instruction
This symbol indicates that an action to be performed is described.
The individual steps are marked by this asterisk, e.g.
h Rotate control knob
h Press control knob