Memory Manager - JUMO LOGOSCREEN nt Operating Instructions Manual

Symbols
Activation
H
for CF cards
A
The memory manager contains functions for data exchange between the
paperless recorder and CF memory cards or USB memory sticks.
The symbol for the Memory manager (menu: Memory manager) in the header
can be shown in different ways.
This shows the available memory of the CompactFlash memory card that has
been inserted.
Shows the available memory of the USB memory stick.
If no CF card or no USB memory card has been inserted, then one of the
following symbols will be shown, depending on the type of data read-out that
was configured.
This shows the available internal memory for reading out data via the
CompactFlash memory card.
This shows the available internal memory for reading out data via the interface.
Access to the memory manager menu via the header is only
possible if a CF card is inserted in the device.
If one of the visualization modes, (see Chapter 4 - e.g. Curve
Presentation), is active when a CF card is inserted in the
instrument, then the menu appears automatically.
If not all functions are available, then you must log in to the device
first, in order to obtain the required access rights.
v Chapter 8.2 "Log-in and Log-out"
The CF card must not be removed while a data transfer to or from
the card is in progress.
If this symbol appears in the status and title
bar, do not remove the CF card!

7 Memory Manager

55