A Ttach Ear Brackets To Front - Promise Technology Vess A3340s Quick Start Manual

Vess A3340s / Vess A3340d
A
ttAch eAr brAckets to front
Ear brackets used for rack installation are available for additional purchase. These at-
tach at the front sides of the device housing. Once the brackets are securely attached
and the unit has been properly installed in the sliding rail system, these handles can
be used to pull or push the device out or into the rack system, while the sliding rails
support the weight of the device.
DO NOT lift or attempt to support the weight of the Vess A3340s/A3340d using the
handles on the ear brackets.
Ear brackets (optional)
left side ear
bracket and
handle
Attach each ear bracket at the front, on each side of the device housing, and secure with the screws
included with the shipment. The handle should protrude in the direction of the front of the device.
The example illustration below shows the right side.
Secure ear bracket to device housing - right side
Cautions
Do not lift or move the Vess A3340s/A3340d unit
by the handles on the ear brackets in front.
Storage Appliance for Video Surveillance
right side ear
bracket and
handle
7