Table of Contents
Advertisement
Vess A3340s / Vess A3340d
2.
Secure the rails to the rack posts. Make sure the rack rails are properly
oriented in the rack.
Press lever to release lock (front right)
3.
To set the rails into the rack posts and secure the rails, follow these steps:
a.
Press the spring lock then insert the studs into the selected square holes
on the rack post.
b.
Press the spring lock on the other end of the rail and insert the studs into
the selected mounting hole on the rack post. If necessary, extend the rail
to reach the post.
c.
Use the rail screws and washers to anchor the rack rail to the post.
d.
Make sure the rack rail is aligned, secure, stable and in the correct place.
e.
Perform steps a through c above for the other rail.
f.
Make sure the rack rails are aligned, secure, stable and in place.
See figure on next page.
Storage Appliance for Video Surveillance
9
Advertisement
Table of Contents
