Jungheinrich ESD 220 Operating Instructions Manual page 91

4.8.6 Lowering Two Pallets In Turn
CAUTION!
Loads must not be deposited on traffic lanes or escape routes, or in front of safety
equipment or operating equipment that must be accessible at all times.
Requirements
– Storage location suitable for storing the load.
Procedure
• Drive the truck carefully up to the first storage location.
• Lower the load support arms until the load rests.
• Carefully move the support arms out of the pallet.
• Lower the forks for correct transport (approx. 150 - 200 mm above the ground).
• Drive the truck carefully up to the second storage location.
• Lower the load forks so that forks are clear of the load (see page 87).
• Carefully withdraw the load forks from the pallet.
Both pallets have been set down.
89