Jungheinrich ESD 220 Operating Instructions Manual page 86

4.7.3 Raising the wheel arms
Requirements
– Prepare the truck for operation, see
page 65.
– Deadman
page 76.
Procedure
• Press the "wheel arm lift" button (57)
on the Multi-Pilot.
Z
Press down on the button until the
wheel arms
maximum height.
The wheel arms are raised.
4.7.4 Lowering the wheel arms
Requirements
– Prepare the truck for operation, see page 65.
– Deadman switch pressed, see page 76.
Procedure
• Press the "wheel arm lower" button (23) on the Multi-Pilot.
Z
Press down on the button until the wheel arms are fully lowered.
The wheel arms are lowered.
84
switch pressed,
have reached
see
their
57 10 23