Jungheinrich ESD 220 Operating Instructions Manual page 73

Negotiating lifts, loading ramps and docks
Lifts may only be negotiated if they have sufficient capacity, are suitable for driving
on and authorised for truck traffic by the owner. The driver must satisfy himself of the
above before entering these areas. The truck must enter lifts with the load in front
and must take up a position which does not allow it to come into contact with the
walls of the lift shaft. Persons riding in the lift with the forklift truck must only enter
the lift after the truck has come to a rest and must leave the lift before the truck. The
driver must ensure that the loading ramp / dock cannot move or come loose during
loading / unloading.
Type of loads to be carried
The operator must make sure that the load is in a satisfactory condition. Loads must
always be positioned safely and carefully. Use suitable precautions to prevent parts
of the load from tipping or falling down. Prevent liquid loads from sloshing out.
WARNING!
Electromagnetic influence can result in accidents
Strong magnets can cause electronic components such as Hall sensors to become
damaged, resulting in accidents.
uDo not use magnets in the operating area of the truck. Exceptions to this rule are
commercial, weak clamping magnets for attaching notices.
71