Jungheinrich ESD 220 Operating Instructions Manual page 53

Removing the battery
Requirements
– Park the truck securely, see page 67.
– Expose the battery, see page 47.
Tools and Material Required
– Battery replacement trolley (o)
Procedure
• Remove the battery connector (52) from the truck.
• Place the battery connector (52) on the battery (55).
• Pull the battery lock (51) up and anti-clockwise as far as it will go
• Pull the battery (55) off the truck.
Z
Observe the battery replacement trolley operating instructions.
The battery is now removed.
51
52
55
51