Jungheinrich ESD 220 Operating Instructions Manual page 85

4.7.1 Raising the load handler
Requirements
– Prepare the truck for operation, see page 65.
– Deadman switch pressed, see page 76.
Procedure
• Pull the Multi-Pilot (10) in the arrow
direction until you reach the required
lift height.
Z
The lift and lower speeds can be
infinitely controlled by moving the
Multi-Pilot.
Short movement = slow lift / lower
Large movement = fast lift / lower
The load handler is raised.
4.7.2 Lowering the load handler
Requirements
– Prepare the truck for operation, see page 65.
– Deadman switch pressed, see page 76.
Procedure
• Push the Multi-Pilot (10) in the arrow
direction until you reach the required
lift height.
Z
The lift and lower speeds can be
infinitely controlled by moving the
Multi-Pilot.
Short movement = slow lift / lower
Large movement = fast lift / lower
The load handler is lowered.
10
10
10
83