Jungheinrich ESD 220 Operating Instructions Manual page 60

Item Control/display
5 Charge/discharge
indicator
6 Key switch and key
CanCode code lock
ISM access module
7 Display and control unit
10 multiPILOT
12 Emergency disconnect
switch
14 Floor-plate height
adjuster
19 Steering wheel
20 Deadman switch
21 Brake pedal (electric)
23 "Support arms lower"
button
56 Horn button
57 "Support arms lift" button
58
Function
t Shows the battery charge status.
t – Activates the truck by applying the
control voltage
– Removing the key prevents the truck
from being switched on by unauthorised
personnel
o Replaces the key switch
– Entering the appropriate code activates
the truck
– Travel program selection
– Code setting
o Replaces the key switch
– Activates the truck via a card/
transponder
– Displays readiness for operation
– Operational data logging
– Data exchange with card/transponder
o Displays key travel and lift parameters,
warning indicators, notification of incorrect
operation and event messages, replaces
the charge/discharge indicator
t Controls:
– Forward/reverse travel
– Load handler lift/lower
t Disconnects the battery supply
– All electric functions are cut out and the
truck is braked.
t Button for releasing and adjusting the floor-
plate height
t Steers the truck
Deadman switch pressed:
– Travel and lifting enabled
Deadman switch not pressed:
– Travel and lifting are deactivated
– The truck brakes to a halt
o Pedal for reducing the travel speed and for
braking the truck to a halt
t Button for lowering the support arms
t Warning signal button
t Button for lifting the support arms