Table of Contents
Advertisement
8.4.7
Delete individual user codes
Requirements
– To prepare the truck for operation, see page 101.
Procedure
• Press the O key (93).
• Enter the valid master code with the digit keys.
When you enter the valid master code the LED
(92) flashes green.
• Enter the parameters 0-0-3 with the digit keys.
• Confirm with the SET key (91).
The LEDs (89,92) flash green.
• Enter the user code to be deleted with the digit keys.
• Confirm with the SET key (91).
The LEDs (90,92) flash green.
• Enter the user code to be deleted again with the digit keys.
• Confirm with the SET key (91).
Wait until the LED (92) flashes green. The user code is now deleted.
• Press the O key (93).
The truck is switched off and the LED (92) is lit red.
• Check that the user code has been deleted:
• Switch the truck on with the user code to be deleted, see page 101
After entering the user code the LED (92) flashes red and the truck remains
switched off.
• Press the O key (93).
The truck remains switched off and the LED (92) is lit red.
108
88
89
90
91
92
93
Advertisement
Chapters
Table of Contents
Troubleshooting
