Parking the truck securely
Procedure
• Park the truck on a level surface.
• Fully lower the load handler (65):
• Apply the "wheel arm lower" button (23) .
• Press the Multi-Pilot (10) in the arrow direction.
• Set the drive wheel to "Straight ahead".
• Switch off the truck, to do this:
• Turn the key in the key switch (6) anti-clockwise as far as it will go. Remove the
key from the key switch (6).
• For CanCode (8), press the O key (o).
• Press the red key on the ISM access module (o).
• Press the Emergency Disconnect switch (12).
10
10
The truck is parked.
68
12
12
65
23
23
6,8
6,8
23
6,8
10
12