Jungheinrich ESD 220 Operating Instructions Manual page 154

1.2.2 Inspection contents
The following points must be checked:
1.2.2.1 Standard equipment
Electrical system
Cables and engine are secure and for damage
Warning and safety devices are in accordance with the operating instructions
Function of display and controls
The function of the emergency disconnect and for damage
Contactors and/or relays for wear and damage
The electric wiring for damage (insulation damage, connections) and the fuse ratings
Carbon brushes for wear
Connections and cables are secure and for insulation damage and other damage
Power supply
The function of the battery latch and battery attachment and for damage
The function and secure seating of the battery connector and for damage
Travel
The function of the deadman switch and for damage
Drivetrain bearings for wear and damage
Transmission for noise and leaks
Wheel bearings and attachment for wear and damage
Wheels for wear, damage and secure mounting
Chassis/structure
Industrial truck for damage and leaks
The secure seating of the chassis and screw connections and for damage
Labels are legible, complete and plausible
Driver's seat for damage
The driver's cab is securely attached
The secure seating of the driver's seat and the function of the adjustment mechanism
The secure seating of the mast
Protective screen panel or protective grille for damage
Hydraulic operations
The function of the "hydraulic system" controls and for legibility, completeness and
plausibility
Lift sensors in the mast for damage
The secure seating of the cylinders and piston rods and for leaks and damage
Lateral play of the mast sections and fork carriage
Slides and stops for wear and damage
152