Jungheinrich ESD 220 Operating Instructions Manual page 113

8.4.9 Choose length of the new master code (4-6 digit) and add user codes
Z
The master code is factory set to a four-digit entry: If necessary, the four-digit master
code can be changed to a five or six-digit entry. Before the master code length can
be changed, all user codes must be deleted. The length of the user code (4-6 digit)
is always determined by the length of the master code.
Requirements
– To prepare the truck for operation, see page 101.
Procedure
• Delete all user codes, see page 110.
• Enter the new master code (4-6 digit), see
page 102.
• Add user codes again, see page 104.
The length of the new master code is now changed
and user codes have been added.
88 89 90
91 92 93
111