Checks And Operations To Be Carried Out When The Truck Is Operational - Jungheinrich ESD 220 Operating Instructions Manual

3.6 Checks and operations to be carried out when the truck is
operational
WARNING!
Risk of accident due to damage to or other defects in the truck and optional
features
If damage or other truck or attachment (optional equipment) defects are discovered
during the following checks, the truck must be taken out of service until it has been
repaired.
uReport any defects immediately to your supervisor.
uMark defective truck and take out of service.
uDo not return the industrial truck to service until you have identified and rectified
the fault.
Procedure
• Test warning indicators and safety devices:
• Test the Emergency Disconnect function by pressing the Emergency
Disconnect switch. The main circuit is disconnected and no truck operations
can be performed. Now pull the Emergency Disconnect switch to unlock it.
• Test the horn by pressing the "warning signal" button.
• Test the effectiveness of the brakes, see page 80.
• Test the steering, see page 79.
• Test the hydraulic system, see page 82.
• Test travel operations, see page 76.
• Test the controls and displays and check for damage, see page 57.
• Check the controls are automatically restored to the neutral position after being
applied.
66