Trouble Shooting Tips - ADJ M-1212 User Manual

T R O U B L E S H O O T I N G T I P S
Mirror Ball Attached To Motor Does Not Rotate or Rotates Inconsistently
1. Confirm the motor has AC power.
2. Check if circuit breaker that controls the AC outlet the motor is plugged into is not tripped.
3. Confirm the AC power cord from the motor is not damaged or cut.
4. Confirm the eyelet attached to the mirror ball is not damaged or loose.
5. If none of these solutions work, please contact ADJ Customer Service.
Motor Makes Noise When Rotating
1. Disconnect AC power from the motor, remove mirror ball, and uninstall the motor.
2. Inspect the motor for any signs of damage such as from water or moisture.
3. Place the motor on a flat surface and connect to an AC power source.
4. If motor makes noise while rotating, please contact ADJ Customer Service.
5. If not, carefully rotate the motor facing the axel shaft toward the ground.
6. If motor makes noise while rotating, please contact ADJ Customer Service.
7. If not, confirm the motor can support the weight of the mirror ball.
8. If none of these solutions work, please contact ADJ Customer Service.
13