Selecting The Remote Control Id (Remote Id); Changing The Fm/Am Tuning Frequency Setting (Tuner Frq Step); Switching The Video Signal Type (Tv Format); Removing The Limitation On Hdmi Video Output (Monitor Check) - Yamaha aventage RX-A3070 Owner's Manual

Selecting the remote control ID (REMOTE ID)

REMOTE ID
ID1
Change the unit's remote control ID so that it matches the remote control's ID (default: ID1).
When using multiple Yamaha AV receivers, you can set each remote control with a unique
remote control ID for its corresponding receiver.
Settings
ID1, ID2
■ Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (e) and SCENE1 together for 3 seconds.
To select ID2, hold down the cursor key (e) and SCENE2 together for 3 seconds.
Changing the FM/AM tuning frequency setting
(TUNER FRQ STEP)
(Brazil, Asia and General models only)
TUNER FRQ STEP
FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps and AM by
FM100/AM10
10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps and AM by
FM50/AM9
9-kHz steps.

Switching the video signal type (TV FORMAT)

TV FORMAT
Switch the video signal type of the unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea, Brazil and General models: NTSC
Other models: PAL
Removing the limitation on HDMI video output
(MONITOR CHECK)
MONITOR CHECK
The unit automatically detects resolutions supported by a TV connected to the HDMI OUT jack.
Disable the monitor check function if you want to specify a resolution in "Resolution" (p.149)
when the unit cannot detect the TV's resolution or when you want to specify a different
resolution than the detected resolution.
Settings
Enables the monitor check function. (Outputs video signals with a resolution
YES
supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a specified
SKIP
resolution regardless of compatibility with the TV.)
Y
Reset to "YES" if the unit becomes inoperable because video from the unit cannot be displayed on the TV after
"MONITOR CHECK" has been set to "SKIP".
165
En
NTSC
YES