DES-3226S Layer 2 Fast Ethernet Switch User's Guide
The switch port commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
Parameters
config ports
<portlist/all>
speed
[auto/10_half/10_full/100_half/100_full/
1000_half/1000_full]
flow_control [enabled/disabled]
learning [enabled/disabled]
state [enabled/disabled]
show ports
<portlist>
Each command is listed, in detail, in the following sections.
Switch Port Commands
S
P
WITCH
C
OMMANDS
5
ORT
55