DES-3226S Layer 2 Fast Ethernet Switch User's Guide
S
The spanning tree commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
Parameters
config stp
maxage <value>
hellotime <value>
forwarddelay <value>
priority <value>
fdpdu [enabled/disabled]
config stp_ports
<portlist>
cost <value>
priority <value>
priority <value>
state [enabled/disabled]
enable stp
disable stp
show stp
show stp_ports
<portlist>
Each command is listed, in detail, in the following sections.
Spanning Tree Commands
PANNING
C
OMMANDS
9
T
REE
103