D-Link DES-3226SM Reference Manual page 18

DES-3226S Layer 2 Fast Ethernet Switch User's Guide
with the Windows operating system) using an RS-232C serial cable.
Your terminal parameters will need to be set to:
•
VT-100/ANSI compatible
• 9,600 baud
• 8 data bits
• No parity
• One stop bit
•
No flow control
You can also access the same functions over a TELNET interface.
Once you have set an IP address for your Switch, you can use a
TELNET program (in VT-100 compatible terminal mode) to access
and control the Switch. All of the screens are identical, whether
accessed from the console port or from a TELNET interface.
After the switch reboots and you have loged in, the console looks
like this:
18 Using the Console CLI