D-Link DES-3226SM Reference Manual page 89

DES-3226S Layer 2 Fast Ethernet Switch User's Guide
download
Purpose Used to download and install new firmware or
a switch configuration file from a TFTP
server.
Syntax download [ firmware <ipaddr>
<path_filename> {unit
[all/<unitid>]}/configuration <ipaddr>
<path_filename> {increment}]
Description This command is used to download a new
firmware or a switch configuration file from a
TFTP server.
Parameters firmware
firmware on the switch from a TFTP server.
configuration
configuration file from a TFTP server.
<ipaddr> − the IP address of the TFTP server.
<path_filename>
filename
configuration file on the TFTP server.
example, C:\3326s.had.
unit [all/<unitid>] − all specifies all units
(switches), <unitid> is the unit id of the
switch that will receive the download.
increment − allows the download of a partial
switch configuration file. This allows a file to
be downloaded that will change only the
switch parameters explicitly stated in the
configuration
Download/Upload Commands
− download and install
−
download a
− the DOS path
of the firmware or
file. All other
new
switch
and
switch
For
switch
89