D-Link DES-3226SM Reference Manual page 139

DES-3226S Layer 2 Fast Ethernet Switch User's Guide
config priority_add
action the switch will take.
The first part of the command contains the
following parameters:
[mac <macaddr>/ipaddress
<ipaddr>/802.1p <value>/tcp
<tcp_port_number>/udp
<udp_port_number>]
These parameters define what characteristics
an incoming packet must meet. One or more of
the above parameters must be defined.
The second part of the command contains the
following parameters:
{replace_dscp <value>/priority <value>
{replace_priority}
Incoming packets that meet the characteristics
defined in the first part of the command (for
example, they are destined for TCP 23) will
then be subject to the actions in the second
part of the command (for example, priority 3
replace_priority). In this example, incoming
packets destined for TCP 23 will have their
priority replaced with the value 3.
Parameters First Part
mac <macaddr> − The MAC address that must
be the destination address in an incoming
packet for the second part of the command to
be executed.
QOS Commands
−
Critera to Meet
139