Network Management Commands - D-Link DES-3226SM Reference Manual

DES-3226S Layer 2 Fast Ethernet Switch User's Guide
N
ETWORK
The network management commands in the Command Line
Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
create snmp <community_string>
community [readonly/readwrite]
delete snmp <community_string>
community
create snmp <ipaddr>
trap_receiver <community_string>
delete snmp <ipaddr>
trap_receiver
enable rmon
disable rmon
config snmp <community_string>
community [readonly/readwrite]
config snmp <ipaddr>
trap_reciever <community_string>
config snmp <sw_contact>
system_contact

Network Management Commands

M
ANAGEMENT
C
OMMANDS
6
61