D-Link DES-3226SM Reference Manual page 84

DES-3226S Layer 2 Fast Ethernet Switch User's Guide
ping
Purpose Used to test the connectivity between network
devices.
Syntax ping <ipaddr> {times <value>} {timeout
<sec>}
Description This
Message Protocol (ICMP) echo messages to a
remote IP address. The remote IP address
will then "echo" or return the message. This
is used to confirm connectivity between the
switch and the remote device.
Parameters <ipaddr> − the IP address of the remote
device.
times <value> − the number of individual
ICMP echo messages to be sent. A value of 0
will send an infinite ICMP echo messages.
The maximum value is 255. The default is 0
timeout <sec> − defines the time-out period
while waiting for a response from the remote
device.
specified. The default is 1 second.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To send ICMP echo message to "10.48.74.121" for 4 times:
84
command sends Internet
A value of 1 to 99 seconds can be
Network Management Commands
Control