D-Link DES-3226SM Reference Manual page 74

DES-3226S Layer 2 Fast Ethernet Switch User's Guide
config snmp system_contact
Purpose Used to enter the name of a contact person
who is responsible for the switch.
Syntax config
<sw_contact>
Description This command is used to enter the name
and/or other information to identify a contact
person who is responsible for the switch. A
maximum of 128 character can be used.
Parameters <sw_contact>
characters used to identify a contact person
who is responsible for the switch.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To configure the switch contact to "dlink":
.
DES3226S:4#config snmp system_contact dlink
Command: config snmp system_contact dlink
Success.
DES3226S:4#
74
snmp system_contact
− a maximum of 128
Network Management Commands