D-Link DES-3226SM Reference Manual page 184

DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Each command is listed, in detail, in the following sections.
create link_aggregation group_id
Purpose Used to create a link aggregation group on
the switch.
Syntax create
<value>
Description This command will create a link aggregation
group.
Parameters
<value> − Specifies the group id. The switch
allows up to 6 link aggregation groups to be
configured. The group number identifies each
of the groups.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To create link aggregation group:
DES3226S:4#create link_aggregation group_id 1
Command: create link_aggregation group_id 1
Success.
DES3226S:4#
184
link_aggregation group_id
Link Aggregation Commands