Port-Channel; No Port-Channel; Clear Port-Channel; Port-Channel Staticcapability - D-Link DES-3226L Cli Command Reference

58 D-Link DES-3226L Command Line Reference

port-channel

This command configures a new port-channel and generates a logical slot/port number for the port-
channel. The <name> field is a character string which allows the dash "-" character as well as
alphanumeric characters. Display this number using the "show port-channel" command.
Note:
Format
Mode

no port-channel

This command deletes a port-channel (LAG).
Format
Mode

clear port-channel

Use this command to clear all configured port channels.
Format
Mode

port-channel staticcapability

This command enables the support of port-channels (static link aggregations) on the device. By default,
the static capability for all port-channels is disabled.
Default
Format
Mode

no port-channel staticcapability

This command disables the support of static port-channels on the device.
Format
Mode

port lacpmode

This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Format
Mode
Before you include a port in a port-channel, set the port physical mode. For more
information, see "speed" on page 39.
port-channel <name>
Global Config
no port-channel {<logical slot/port> | all}
Global Config
clear port-channel
Privileged EXEC
disabled
port-channel staticcapability
Global Config
no port-channel staticcapability
Global Config
enabled
port lacpmode
Interface Config