Show Radius Statistics - D-Link DES-3226L Cli Command Reference

Responses
Malformed Responses
Bad Authenticators
Pending Requests
Timeouts
Unknown Types
Packets Dropped

show radius statistics

This command is used to display the statistics for RADIUS or configured server. To show the
configured RADIUS server statistic, the IP Address specified must match that of a previously
configured RADIUS server. On execution, the following fields are displayed.
Format
Mode
If the IP address is not specified, then only Invalid Server Address field is displayed. Otherwise other
listed fields are displayed.
Invalid Server Addresses
Server IP Address
Round Trip Time
Access Requests
Access Retransmission
Access Accepts
Access Rejects
Access Challenges
The number of RADIUS packets received on the accounting port from this
server.
The number of malformed RADIUS Accounting-Response packets
received from this server. Malformed packets include packets with an invalid
length. Bad authenticators and unknown types are not included as malformed
accounting responses.
The number of RADIUS Accounting-Response packets containing
invalid authenticators received from this accounting server.
The number of RADIUS Accounting-Request packets sent to this server
that have not yet timed out or received a response.
The number of accounting timeouts to this server.
The number of RADIUS packets of unknown types, which were received
from this server on the accounting port.
The number of RADIUS packets received from this server on the
accounting port and dropped for some other reason.
show radius statistics [ipaddr]
Privileged EXEC
The number of RADIUS Access-Response packets received
from unknown addresses.
IP Address of the Server.
The time interval, in hundredths of a second, between the most recent
Access-Reply, Access-Challenge and the Access-Request that matched it
from the RADIUS authentication server.
The number of RADIUS Access-Request packets sent to this server. This
number does not include retransmissions.
The number of RADIUS Access-Request packets retransmitted to
this RADIUS authentication server.
The number of RADIUS Access-Accept packets, including both valid and
invalid packets, which were received from this server.
The number of RADIUS Access-Reject packets, including both valid and
invalid packets, which were received from this server.
The number of RADIUS Access-Challenge packets, including both
valid and invalid packets, which were received from this server.
Access and Security Commands 99