Mode-Based Topology; Mode-Based Command Hierarchy - D-Link DES-3226L Cli Command Reference
Layer 2 switch, 24 port 10/100 managed switch plus 2 combo gigabit copper/sfp ports
Hide thumbs
Also See for DES-3226L:
- Manual (134 pages) ,
- Reference manual (228 pages) ,
- User manual (110 pages)
Table of Contents
Advertisement
26
D-Link DES-3226L Command Line Reference
Mode-based Topology
The CLI tree is built on a mode concept where the commands are available according to the interface.
Some of the modes are depicted in Figure 1.
Figure 1. Mode-based CLI
The User EXEC commands
are also accessible in the
Privileged EXEC mode.
Access to all commands in the Privileged EXEC mode and below are restricted through a password.
Mode-based Command Hierarchy
The commands in one mode are not available until you switch to that particular mode, with the
exception of the User EXEC mode commands. You can execute the User EXEC mode commands in the
Privileged EXEC mode.
The commands available to you depend upon the mode. To display a list of the available commands and
descriptions of the commands, enter a question mark (?) at the CLI prompt.
ROOT
User EXEC
Enable
Passwd
Correc
Correct
t
?
Privileged EXEC
VLAN
Line Config
Return to the
No
EXEC prompt
Yes
Global Config
Interface Config
Advertisement
Table of Contents
