Telnetcon Timeout; No Telnetcon Timeout; Bridge Aging-Time; No Bridge Aging-Time - D-Link DES-3226L Cli Command Reference

Layer 2 switch, 24 port 10/100 managed switch plus 2 combo gigabit copper/sfp ports
Hide thumbs Also See for DES-3226L:
Table of Contents

Advertisement

telnetcon timeout

This command sets the telnet connection session timeout value, in minutes. A session is active as long
as the session has not been idle for the value set. The time is a decimal value from 1 to 160.
Note:
Default
Format
Mode

no telnetcon timeout

This command sets the telnet connection session timeout value to the default.
Note:
Format
Mode

bridge aging-time

This command configures the forwarding database address aging timeout in seconds. In an IVL system,
the [fdbid | all] parameter is required. The <seconds> parameter must be within the range of 10 to
1,000,000 seconds. Fdbid (Forwarding database ID) indicates which forwarding database's aging
timeout is being configured. The All option is used to configure all forwarding database's agetime.
Default
Format
Mode

no bridge aging-time

This command sets the forwarding database address aging timeout to 300 seconds. In an IVL system,
the [fdbid | all] parameter is required. Fdbid (Forwarding database ID) indicates which forwarding
database's aging timeout is being configured. All is used to configure all forwarding database's agetime.
Format
Mode

network javamode

This command specifies whether or not the switch should allow access to the Java applet in the header
frame of the Web interface. When access is enabled, the Java applet can be viewed from the Web
interface. When access is disabled, the user cannot view the Java applet.
Default
Format
Mode
Changing the timeout value for active sessions does not become effective until the
session is reaccessed. Also, any keystroke activates the new timeout duration.
5
telnetcon timeout <1-160>
Privileged EXEC
Changing the timeout value for active sessions does not become effective until the
session is reaccessed. Also, any keystroke activates the new timeout duration.
no telnetcon timeout
Privileged EXEC
300
bridge aging-time <10-1,000,000> [fdbid | all]
Global Config
no bridge aging-time [fdbid | all]
Global Config
enabled
network javamode
Privileged EXEC
Setup and Management Commands
31

Advertisement

Table of Contents
loading

Table of Contents