Cablestatus; Auto-Negotiate; No Auto-Negotiate; Auto-Negotiate All - D-Link DES-3226L Cli Command Reference

36 D-Link DES-3226L Command Line Reference

cablestatus

This command tests the status of the cable attached to an interface.
Format
Mode

auto-negotiate

This command enables automatic negotiation on a port. The default value is enable.
Format
Mode

no auto-negotiate

This command disables automatic negotiation on a port.
Note:
Format
Mode

auto-negotiate all

This command enables automatic negotiation on all ports. The default value is enable.
Format
Mode

no auto-negotiate all

This command disables automatic negotiation on all ports.
Format
Mode
deleteport
(Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical slot and port
number of a configured port-channel.
Format
Mode
deleteport
(Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a logical slot
and port number of a configured port-channel.
Format
Mode
cablestatus <slot/port>
Privileged EXEC
auto-negotiate
Interface Config
Automatic sensing is disabled when automatic negotiation is disabled.
no auto-negotiate
Interface Config
auto-negotiate all
Global Config
no auto-negotiate all
Global Config
deleteport <logical slot/port>
Interface Config
deleteport {<logical slot/port> | all}
Global Config